Rexroth series motor pump valve ger box and parts A4VTG manufacturer from China GUANGZHOU OUSTER HYDRAULIC Co.,Ltd.

Rexroth series motor pump valve ger box and parts

Price:	100.0 USD
Payment Terms:	T/T,Paypal
Place of Origin:	Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: A4VTG

Production Capacity: 10000/year

Delivery Date: 7-10days

Original company: made in china

Means of Transport: Ocean,Land,Air

Packing: wooden box

Brand Name: Rexroth

Our main products is hydrualic pump,motor,valve,ger box,spare parts,etc.Involved in hydraulic brands : REXROTH,PARKER,EATON-VICKERS,KAWASAKI,KOMATSU,Y

product number	Control mode	Specifications	Working pressure	Characteristic
A4VTG	HW1 - Hydraulic proportional control, mechanical servo, rear handle type hexagonal shaft;	71090	Nominal pressure:40MPa, peak pressure: 45MPa .	Swashplate design axial piston variable displacement pump for hydrostatic transmission in closed circuit The flow rate is proportional to the driving speed and displacement. With the increase of the angle of the swashplate from zero to its maximum, the flow rate increases. When the swashplate passes through the middle, the direction of hydraulic oil flow will change smoothly. High-pressure oil outlet is equipped with two pressure relief valves to prevent static transmission (pump and motor) from overloading. High pressure relief valve can also be used as a filling valve. Built-in refueling pump acts as feed pump and controls pressure supply; Maximum filling pressure is limited by built-in filling relief valve.
	EP3 - Electric proportional control with emergency start and spring reset U = 12VDC
	EP4 - Electric proportional control with emergency start and spring reset U = 24VDC
	A-High Pressure Relief Valve with Direct Control


Safety instructions:				Pressure nozzle:
1,A4VTG pump is designed for closed circuit. -Project planning, assembly and commissioning of axial plunger components must be carried out by qualified personnel.	2, Axial plunger units (especially electromagnets) may be at risk of burning during and shortly after operation.	3,Appropriate safety measures (such as wearing protective clothing) should be taken. - The characteristics of the axial plunger unit may vary with different working conditions (working pressure, oil temperature) of the axial plunger element, the characteristics may change.		1,Oil nozzles and fixed threads are designed for maximum prescribed pressure. Machine or system manufacturers must ensure that the safety factor of connecting components and pipes meets the specified working conditions (pressure, flow, hydraulic oil, temperature).	2,The data and instructions contained here must be followed.
Install bolts:				Thread holes in the axial plunger unit:
For installation bolts with ISO metric threads in accordance with DIN 13 standard and with ASME B1.1 standard threads, we recommend that the tightening torque of each box be checked according to VDI 2230.				The maximum allowable tightening torque MG Max is the maximum value for the internal threaded holes and shall not exceed that value.
· Connector:			Use the following tightening torque:
Refer to manufacturer's instructions for tightening torque of the joints used.
· Locking screw:
For the metal locking screw attached to the axial plunger element, the fastening torque MV required for the locking screw is applied. For numerical values, see the table below.