Hydraulic pump motor valve from China manufacturer - GUANGZHOU OUSTER HYDRAULIC Co.,Ltd.

Price:	100.0 USD
Payment Terms:	T/T,Paypal
Place of Origin:	Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: A8VO

Production Capacity: 10000/year

Delivery Date: 7-10days

Original company: made in china

Means of Transport: Ocean,Land,Air

Packing: wooden box

Brand Name: Rexroth

series:55,80,107,140,200
Rated pressure: 350bar, peak pressure: 400 bar.

Product number	Control mode	Specifications	Working pressure	Characteristic
A8VO		55,80,107,140,200	common pressure: 350 bar, peak pressure: 400 bar.	Variable double pump with two axial tapered piston rotary grops of bent-axis designed for hydrostatic drives in open circuits. The flow is proportional to the input speed and to the displacementl,and is infinitely variable from qV max to qV min=0; The pump is suitable for direct mounting on the flywheel case in diesel engines One common suction port for auxiliary pump and both circuits A wide range of control instruments is available for different control and regulating functions Individual power controller Integrated auxiliary pump with pressure-relief valve, optionally with additional pressure-reduction valve Power take-off for mounting axial piston and gear pumps Excellent power to weight ratio long service life












Safety instructions:
1,The A8VO pump is designed for use in open circuits. Project planning, assembly and commissioning of the pump must be carried out by qualified personnel.		2,The working line port and the function port are only designed for the installation of hydraulic lines. The motor (especially the electromagnet) may present a risk of burns during operation and shortly after operation. Take appropriate safety precautions, such as wearing protective clothing.			3,The characteristics of the pump may vary depending on the operating state of the pump (operating pressure, fluid temperature).
Tightening torque:				Installation Notes:
1,The tightening torques stated in this technical data sheet are maximum values and must not exceed these values (maximum thread torque).	2, The manufacturer's instructions for the maximum permissible tightening torque of the installation tool used must be observed!	3, For DIN 13 fixing screws, we recommend a separate check of the tightening torque according to the 2003 version VDI 2230. – The data and information provided herein must prevail.		1,safety instructions The axial piston unit must always be filled with hydraulic oil and vented during commissioning and operation. The above precautions should also be observed when the deactivation time is relatively long, because The system may be emptied through hydraulic lines.		2,The housing drain chamber is internally connected to the suction chamber. There is no need to connect the casing drain line to the tank. Pay attention to the characteristics of the specification 200 rinsing fluid. (port R4) In all operating conditions, the suction line must pass through the lowest oil level in the tank.
Installation location:				3,The minimum suction pressure of port S must not fall below 0.8 bar.
Axis level. Lower than tank installation Below the tank installation means that the pump should be installed below the minimum oil level of the tank.